Electric vehicle to grid (V2G) system
You can apply to connect your electric vehicle to the grid.
Commercial or industrial customers can apply to become a ‘sensitive customer’ if there is a high risk that an extended power outage could result in adverse economic, health, environmental or public safety consequences.
Main Roads WA requires Western Power to authorise all load movements around the State where the load is more than 4.3m high.
If there's power poles on your property let us know any entry considerations prior to accessing your land.
A new electricity supply for a small commercial premise with a maximum demand of 250A/180kVA.
A new electricity supply with a maximum demand greater than 250A/180kVA but no greater than 1300A/1000kVA.
You want an electricity supply with a maximum demand greater than 1300A/1000kVA.
You're doing work that requires part of the Western Power electricity network to be isolated.
You want a permanent or temporary disconnection above a standard supply.
You are doing work that requires part of the Western Power electricity distribution network (0 – 33,000 volts) to be isolated.
You're installing an electricity generating system (such as solar panels) that will feed the Western Power network through inverters.
You want to connect an embedded generation system (such as solar panels) greater than 30kVA and no more than 150kVA
You want us to relocate or permanently remove a distribution stay pole
You want us to relocate or permanently remove a low voltage pole.
You want us to relocate or permanently remove high voltage pole.
You want us to relocate or permanently remove up to 4 streetlights.
You want us to or temporarily isolate, relocate, or permanently remove an unmetered supply pit.
You want us to relocate or permanently remove large portions of equipment not covered by smaller services.
Use this form if you want us to relocate or permanently remove transmission and communication assets.
You want to modify your connection from single phase up to 3 phases, and where a network connection change is required without increasing your capacity. This application must be completed by an electrical contractor.
Convert an existing single phase electricity supply to a standard three phase supply.
You want to upgrade the electricity supply to a maximum demand greater than 250A/180kva but no greater than 1300A/1000kVA
You want to upgrade the electricity supply to a maximum demand greater than 1300A/1000kVA.
Complete this form to request the installation of standard steel or decorative streetlights.
Use this form for apply for a direct connection into an existing unmetered supply pillar (red spot fuse).
Use this form if you want to isolate, reduce or increase the load, or remove an unmetered supply.
If you're designing a large development (subdivision and/or streetlighting), use this form to request a design information package.
Use this form to request a design conformance review for customer designed and constructed street lighting or large subdivisions.
Use this form if you're installing an electricity generating system (such as synchronous generators) that will connect to the grid.
There are many reasons why our infrastructure may need to be removed or relocated. Whatever the reason this is the page to help get the process underway.
We can provide specific network data that may be useful for your job risk assessment/safe work method statement.